How to properly adjust adjustable hinges in furniture？

Introduction

Adjustable hinges are a common feature in modern furniture design. They allow for easy adjustment of doors and cabinets to ensure that they open and close smoothly. However, adjusting these hinges can be a bit tricky if you don’t know what you’re doing. In this article, we’ll go over the proper steps to adjust adjustable hinges in furniture.

Gather Your Tools

Before you start adjusting your furniture hinges, you’ll need to gather a few tools. Here’s what you’ll need:

1. Phillips head screwdriver
2. Flathead screwdriver
3. Adjustable wrench
4. Level

Adjusting the Hinges

Now that you have your tools, it’s time to start adjusting your hinges. Here are the steps:

1. Locate the adjustment screws on the hinge. These are usually located on the side of the hinge and are either Phillips head or flathead screws.
2. Use the appropriate screwdriver to turn the adjustment screws. If the door is sagging, turn the screw clockwise to raise the door. If the door is rubbing against the frame, turn the screw counterclockwise to lower the door.
3. Check the level of the door using a level. If the door is still not level, continue to adjust the screws until it is.
4. If the door is too tight or too loose, use the adjustable wrench to tighten or loosen the hinge pins.
5. Repeat these steps for all adjustable hinges on the furniture.

Conclusion

Adjusting adjustable hinges in furniture is a simple process if you have the right tools and know what you’re doing. By following the steps outlined in this article, you can ensure that your doors and cabinets open and close smoothly and that your furniture looks and functions as it should.