logo
Introduction
Rotary hinges are an essential component in many types of doors, cabinets, and other furniture. They allow a door or lid to swing open and closed smoothly and securely. However, installing rotary hinges can be a bit tricky, especially if you’re new to DIY projects. In this guide, we’ll show you how to correctly install rotary hinges in three easy steps.
Step 1: Choose the Right Hinges
Before you start installing rotary hinges, you need to choose the right type for your project. There are many different types of rotary hinges, including concealed hinges, surface-mounted hinges, and continuous hinges. Each type has its own advantages and disadvantages, so it’s important to choose the one that best fits your needs. Make sure to measure your door or lid carefully to ensure that you choose the right size hinge.
Step 2: Install the Hinges
Once you’ve chosen the right hinges, it’s time to install them. The first step is to mark the location of the hinges on the door or lid. Use a pencil to mark the center of each hinge on the edge of the door or lid. Then, use a drill to make pilot holes for the screws. Make sure the holes are deep enough for the screws to fit snugly. Finally, attach the hinges to the door or lid using the screws provided.
Step 3: Test the Hinges
After you’ve installed the hinges, it’s important to test them to make sure they’re working correctly. Open and close the door or lid several times to ensure that it’s swinging smoothly and without any resistance. If you notice any problems, such as the door or lid not closing properly or rubbing against the frame, you may need to adjust the hinges. This can be done by tightening or loosening the screws that hold the hinges in place. Once you’re satisfied with the way the door or lid is swinging, your installation is complete!