How to properly install front-back adjustable hinges?

Proper installation of front-back adjustable hinges is essential to ensure proper alignment and function of the door. Here are some steps to follow:

1. Determine the position of the hinge: Mark the location of the hinge on both the door and the frame using a pencil and a straight edge.
2. Pre-drill the screw holes: Use a drill to create pilot holes for the screws in both the door and the frame. This will prevent the wood from splitting when the screws are inserted.
3. Install the hinge plates: Attach the hinge plates to the door and frame using screws. Make sure that the hinge pin is oriented correctly and that the hinge plates are aligned with each other.
4. Adjust the depth of the door: Use a screwdriver to adjust the depth of the door by turning the adjustment screw on the base of the hinge plate attached to the frame. This will bring the door closer to or further away from the frame as needed.
5. Test the door: Open and close the door several times to ensure that it operates smoothly and is properly aligned with the frame.
6. Make final adjustments: If necessary, make additional adjustments to the depth of the door by turning the adjustment screw on the base of the hinge plate attached to the frame. Repeat the testing process until the door is properly aligned and functions smoothly.

Proper installation of front-back adjustable hinges is important to ensure the longevity and performance of the door. By following these steps, you can achieve precise alignment and adjustment of the door position for your furniture application