How to correctly install left and right adjustable hinges？

Introduction

Left and right adjustable hinges are commonly used for doors and cabinets. However, incorrect installation can cause the door to sag or not close properly. In this article, we will provide a step-by-step guide on how to correctly install left and right adjustable hinges.

Tools and Materials

Before starting the installation process, you will need the following tools and materials:

1. Adjustable hinges
2. Screws
3. Screwdriver
4. Drill
5. Measuring tape
6. Pencil
7. Level

Installation Steps

Follow these steps to correctly install left and right adjustable hinges:

1. Remove the old hinges from the door and frame using a screwdriver.
2. Measure and mark the placement of the new hinges on the door and frame using a measuring tape and pencil. Make sure the hinges are evenly spaced and level.
3. Use a drill to create pilot holes for the screws on the marked areas.
4. Attach the hinges to the door using screws. Make sure the hinges are securely fastened and level.
5. Hold the door up to the frame and mark the placement of the hinges on the frame using a pencil.
6. Use a drill to create pilot holes for the screws on the marked areas.
7. Attach the hinges to the frame using screws. Make sure the hinges are securely fastened and level.

After completing these steps, test the door to make sure it opens and closes properly. If adjustments are needed, use the adjustment screws on the hinges to make the necessary changes.